HoD’s Desk

Prof. Onkar Mal Bunkar Head of the Department Department of Mechanical Engineering

Mechanical Engineering is the core for manufacturing economy of any country. The ambit of mechanical professionals extends from the manufacture of a pin to shape and fabricate launch vehicles for satellites and space crafts. This department was established in the year 2010 and now offers Diploma, B.Voc, B.Tech (Mechanical Engineering), M.Tech (Industrial and Production Engineering) and Ph.D. programs. Here at Dr. K. N. Modi University; we have a number of students in our department which are our strength. These students are guided and motivated by the team of well qualified and experienced faculties those collective efforts results in shaping the future of students.

Our Vision

The Mechanical Engineering Department is committed to be recognized globally for outstanding education and research leading to well qualified engineers who are innovative, entrepreneurial and successful in advanced fields of engineering & research and ready to contribute effectively to the advancement of the industry and society.

Also to be pioneer in the field of research & innovation with right amount of emphasis on holistic development in the respective areas of interest of students and faculties as well.

Our Mission

• 1. To impart quality education in Mechanical Engineering and allied areas at under graduate levels by integrating effective teaching learning process.
• To equip the students apply fundamental knowledge in Mechanical Engineering and gain knowledge of emerging areas and cutting edge technologies.
• To encourage entrepreneurship and to develop sustainable technologies for the benefit of society.
• To provide an environment for acquiring ethical values and positive attitude through conducive atmosphere for research and development at national and global level.
• To enable interaction of the students with the industry for achieving professional growth contributing to the development of the nation.

Events and Seminars

• WEBINAR ON INDUSTRIAL ROBOTICS Date: 28.5.22

Department organized an webinar on Industrial Robotics on 28.5.2022 at 10:15 am through online mode. Speaker for this webinar was Mr. Sandeep Kumar Siemens center of excellence, NIT Kurukshetra. In the webinar all departmental students, faculty members and other departmental faculty members were present. At the beginning of webinar Dr. Pradeep kumar sharma welcome to Guest with a welcome note. After this Mr. Sandeep started his presentation through PPT. At the last of webinar Mr. Onkar mal bunkar present vote of thanks to all. Student were very much beneficial about Robotics and career in robotics.

Key points of the presentation were as follows:

• Introduction & History about Robotics
• Types of Robotics.
• Different parts of Robots.
• Types of different motions of Robots.
• Advantages, Disadvantages & Applications of Robots.
• Robotics Industries.
• Human effort Vs Robots.
• Career in Robotics
• Informations about Courses related Robotics.

AN Expert lecture on  “Creativity, Innovation & Product Design for Engineers” 

An expert lecture on “Creativity, Innovation & Product Design for engineers” organized by Department Of  Mechanical & Automobile Engineering on 12/08/2022 via Zoom Link of university. External resource person was Mr. Manoj Kumar, Design expert Moradabad Brass Industry, Moradabad. More than 25 students of B.Tech, Diploma and faculties from various department participated in this talk, Firstly Mr. Sandeep Gupta, registrar, DKNMU, newai welcome the guest from the department as well as university and gave the brief introduction of speaker. After completion the webinar Dr. Sagar Kumar Associate professor Mechanical dept DKNMU Newai presented the summary of talk and Mr. Onkar mal Bunker HOD ME has given the votes of thanks to speaker Mr. Manoj Kumar for his knowledgeable presentation, thanks to all Head of departments and student

International Conference 2019

• On July 10-11, 2019, “International Conference on Multidisciplinary Approaches and their Scopes (ICMAS)” The conference was graced by the presence of keynote speakers- Dr. O.P. Yadav, NDSU, USA; Dr. Dixit Garg, NIT Kurukshetra; Dr. P. K. Pandey, PSNSU, M.P. & Dr. Rajiv Dutta, DKNMU, Newai. In this conference, 64 researchers from various countries including Ethiopia, USA, Canada, South Africa, Korea, etc. presented 62 papers.

National Workshop on teaching Learning Process

• On July 17-21, 2019; this workshop was organized in collaboration with the Education Department.

National Workshop on Research Orientation

• On July 10-14, 2019; this workshop was conducted where 50 participants had taken active part. The keynote speakers for the different sessions were Dr. Vineet Gupta, HOD-Mechanical Department; Dr. Rajiv Dutta, HOD-Applied Sciences, Dr. J. P. Dubey, Applied Physics & Dr. A. H. Faizee, HOD-Humanities Department.

National Workshop on CNC Programming

• From 4th to 9th April 2019 in the national workshop, around 40 participants took participation. The resource persons were Assist. Professor Mr. Pradeep Sharma Assist. Professor Mr. & Radheshyam Rathore,  from Mechanical Department DKNMU, Newai, Mr. Mahender Kumar Trainer & Mr. Kushal Tiwary Trainers, from BSD, Jaipur.

Robotic Club inauguration

• On 18th August 2018 the Mechanical department inaugurated the Robotic club in the presence of all faculty & staff of the department. Mr. Praney Mathur CEO Widig Solution Pvt. Ltd. Along with Mr. Sumit srivastava, CEO Gensus Edutrainers pvt. Ltd. were the chief guests for the day.

Vishwakarma Day 

• On 17th September of every year, Vishwakarma Day is being celebrated with purity & enthusiasm by active participation of entire faculty fraternity of university & cultural program organized by all students.

Industrial Conclave’18

• On 17th September 2018 Headed by Mr. Raghav Kabra chairman Raghav productivity enhancers Ltd. and Pragya Trikha Co-Founder Fenestec Technologies pvt. Ltd. The industrial conclave threw light on the Govt. schemes for young entrepreneurs and how to sustain the competition.

BAT Club Inauguration

• On 28th September 2018 the Mechanical department inaugurated the BAT Club (Bikers and Trekkers Club) in the presence of all faculty & staff of the department. Mr. Alsaif Naddafi, Director, Yahama Motors Tonk, was the chief guests for the day

Technical Summit 2017

• 22nd -23rd Feb-2017 “International Conference on Research Skilling and Employability in Mechanical and Automobile Engineering (ICRSEMAE)”– This two day conference witnessed dignitaries like Dr. Mangu Singh, M.D. DMRC, Dr. R. K. Khandal, Ex V.C. UPTU, Dr. Rajiv Chawla, Chairman I am SME of India are to name a few.

Please click here to view report

Technical Summit 2016

• Feb-2016 “International Conference on technological Drift in Mechanical and Automobile Engineering (ICTDMAE)” – This conference invited speakers from pan India. Dr. R. S. Shikarwar, Director TTTR Bhopal, Dr. Meghanshu Vashishtha, IIT BHU, Prof. S. L. Soni MNIT Jaipur are to name a few.

PO & PSO

PROGRAM OUCOMES PO's

• PO1:Engineering Knowledge: Apply knowledge of Mathematics, Science, Engineering fundamentals and an engineering specialization to the solutions of complex engineering problems.
• PO2:Problem Analysis: Identify, formulate research literature and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences and engineering sciences
• PO3:Design/development of solutions: Design solutions for complex engineering problems and design system components or processes that meet specified needs with appropriate consideration for public health and safety, cultural, societal and environmental considerations.
• PO4:Conduct investigations of complex problems: Using research-based knowledge and research methods including design of experiments, analysis and interpretation of data and synthesis of the information to provide valid conclusions
• PO5:Modern tool usage: Create, select and apply appropriate techniques, resources and modern engineering and IT tools including prediction and modeling to complex engineering activities with an under- standing of the limitations.
• PO6:The Engineer and Society: Apply reasoning informed by contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to professional engineering practice
• PO7:Environment and Sustainability: Understand the impact of professional engineering solutions in societal and environmental contexts and demonstrate knowledge of and need for sustainable development.
• PO8:Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of engineering practice
• PO9:Individual and Teamwork: Function effectively as an individual, and as a member or leader in diverse teams and in multi-disciplinary settings.
• PO10:Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as being able to comprehend and write effective reports and design documentation, make effective presentations and give and receive clear instructions.
• PO11:Project Management and Finance: Demonstrate knowledge and understanding of engineering and management principles and apply these to owners' own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.
• PO12:Lifelong Learning: Recognize the need for and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

PROGRAMME SPECIFIC OUTCOMES [PSO'S]

Programme Specific Outcomes  [PSO’s] OF B.Tech.  in Mechanical Engineering

• PSO1: Categorize, create and solve engineering problems related to various materials and their properties using skills, techniques and state of art of mechanical engineering tools.
• PSO2: Have good awareness of problem analysis related to design, manufacturing, production and marketing.
• PSO3: Apply the mechanical engineering principles to design and develop components which can be assembled into systems.
• PSO4: Conduct investigation of complex problem related to the thermal and mechanical behavior of materials and systems 

Programme Specific Outcomes [PSO's] OF M.Tech. (Industrial & Production )

• PSO1: A commitment to solve industrial problems by interacting with industrialists.
• PSO2: Urge to develop newer and cost-effective production processes with enhanced quality.
• PSO3: The ability to design effective and efficient producible products.
• PSO4: To improve the performance of existing operations.
  

Programme Specific Outcomes  [PSO's] OF M.Tech. (Automobile Engineering)

• PSO1: Graduates of Mechanical Engineering will be engineering professionals and innovators in core engineering, service industries or pursue higher studies.
• PSO2: Graduates of Mechanical Engineering will be team players who are equipped to provide sustainable solutions for complex interdisciplinary problems using modern tools
• PSO3: Graduated of Mechanical Engineering will be able to engage in professional activities ethically and thereby enhance the knowledge and contribution towards the society through lifelong learning.

Infrastructure / Facilities

Practical and physical applications of various laws, theories, mechanisms and the know-how of machinery are integral part of mechanical engineering. Our well-equipped laboratories & workshop aid the teaching learning process by practically visualizing them the applications in real life. There are 8 different designated laboratories with advanced machinery, cut-sections and equipment, a CAD lab with design software to cater the design skills and a large all facility workshop for all the welding, foundry and forge needs.

Engineering Mechanics Lab

The Engineering Mechanics Laboratory helps engineers to understand the application of theory that he has studied in Basic Applied Mechanics by practicing & performing experiments and verifying results. Besides the above, the objective of the curriculum with effective skill will be developed in them to observe experimental data, and to analyze the results. These topics of this curriculum will certainly build their confidence in performing the utilization of principle of mechanics in engineering works.

Material Science & Testing Lab

All engineering materials used in structures & mechanisms must be known for their mechanical properties. In this lab the students are made conversant to the basic principles & testing methodologies for tests for tensile strength & compressive strength, toughness, hardness, torsional & bending strength

Heat & Mass Transfer Lab

Heat and mass transfer are the areas of engineering that address how quickly energy or material substances move from one place to another. Understanding these phenomena is essential to designing and analyzing heating and cooling operations, and most separation processes.

The Heat and Mass Transfer Laboratory offers experiments for boiling-film heat transfer, counter heat exchange, thermal conductivity, home heating system design, and radiation. Mass transfer experiments include membrane separations and liquid-liquid extraction.

Measurement Metrology Lab

Metrology is the science of measurement. At the base of metrology are the definition, realization and dissemination of units of measurement the students need to understand the basic principles and uses of different types of precession and other measuring equipments. In the measurement & metrology lab the students are made convergent with all these equipments.

Dynamics of Machines Lab

An awareness of the way machines work is fundamental to most engineering courses. Students need to understand the principles of mechanical advantage, cams, vibration and mechanical movement to give them a solid foundation of knowledge about mechanical system behavior. This knowledge will serve them throughout their academic and future engineering careers. The Dynamics of Machines Lab teach the principles and theory of laws / principles in mechanical mechanism.

CAD/CAM Lab

It is a well known fact that the present era is of computers and the mechanical engineering is no exception.

The CAD/CAM lab is equipped with the latest computers and software to cater the two and three dimensional design and drafting needs. An CNC machines are provided to inculcate the modern machining by controlling the tool movement through computers.

Automobile Engineering Lab

Automobile sector is one of the ever growing sectors. In the automobile engineering lab, a student learns the functioning of all its systems. This lab is equipped with various cut sections of engine parts, body / chassis, gear mechanism, steering mechanisms and other parts.

Fluid Mechanics and Hydraulic Machine Lab

The laboratory is designed to give introduction to basic fundamentals of mechanics of fluid by demonstrating through experimental procedures. The range of experiments are provided covers the complete field of the “Fundamentals of Fluid Mechanics for Engineering” such as: Pipe friction, Laminar and turbulent flow, Bernoulli’s principle, Osborne Reynolds, Hydrostatic pressure, Impact of a jet, Orifice discharge, Vortex, Flow visualization, Flow meters, Flow channel, Turbo-machines: centrifugal pump, Pelton and Francis turbine, Hydraulic ram pump, etc.

RAC Lab

Keeping cool has been a human preoccupation for millennia, In this modern era refrigeration & air-conditioning will be the most wanted field of engineering. With the increase of living standards the comfort air conditioning is no longer considered a luxury but a fact of modern existence. The industrial use need not be emphasized The RAC lab is equipped with all the equipment to give a comprehensive knowledge about the basic principles of refrigeration and air-conditioning, consistent with the syllabus.

Student / Faculty Achievement

Apart from excelling in the academic field the students here get enough exposure to excel in their interested field, the following are the few achievements of our students

PROJECTS:

Design & Fabrication of Solar car.

Design and Fabrication of DIRT bike.

• Design and Fabrication of H.H.O. Bike
• Design and Fabrication of L.P.G. Bike
• Fabrication of Battery Operated Bicycle.

Design and Fabrication of Solar Water Collectors ( Flat plate and Parabolic Collectors)

Design and Fabrication of Solar Water Distillation.

• Model Of Cooling Tower
• Solid Waste Steam Turbine
• Wooden Refrigerator
• Bicycle Generator
• Flat Plate Solar Water Heater
• Storage Water Cooler
• 3d - Modeling
• Scrap Collecting Vehicle
• Solar Turbine
• Evaporative Air Conditioner
• Concentrating Solar Water Heater
• Solenoid Engine
• Wind Turbine
• Home Made Air Conditioner
• Home Made Washing Machine
• Box Type Solar Cooker
• Bicycle Water Pump
• Solar Dryer

Some additional achievements are listed below:

• Bharath G.K. got Silver medal in Hammer Throw at UDGHOSH-14 IIT Kanpur.
• Bharath G.K. got selected in Sa Re Ga Ma Pa Singing reality show 2016 of Zee TV.
• Many students of our department qualified in GATE examination.
• Some of the students also got selected for higher studies in foreign institutions and universities.
• The project of Abhijeet Das and team got the best project prize for their project on Hydro bike at ICRSEMAE-17 at Dr. K. N. Modi University.
• Tushar Gupta, Pranavendra Singh Rathore, Darshan Pareek and Raja Babu our students from 2^nd year got third prize for their Scientific Paper Presentation on Renewable Energy Scenario at ICRSEMAE-17 at Dr. K. N. Modi University.

Sponsored Research & Consultancy Projects

Consultancy Projects

Research Initiatives

PUBLICATIONS BY FACULTY

• 1. Dr. Sagar Kumar  ,Comparative study on the use of edible oil-based biodiesel blends on engine performance and their emissions  https://zgsyjgysyhgjs.cn/index.php/reric/article/view/2-2320.html China Petroleum Processing and Petrochemical Technology Catalyst Research Volume 23, Issue 2, October 2023 Pp. 2320-2339.
  2. Dr. Sagar Kumar . “Evaluating the effect of different percentage addition of SiC on mechanical and wear properties of Al6061 composite" (MS-Nr: masy.202300164.R1) (Scopus Accepted) (2023),
  3. Dr. Pradeep Kumar Sharma, Dr. Sagar Kumar, Mr. Onkarmal Bunkar, “Estimation of Cycle Time for Lathe Machine Operation Using Different Materials” in International Journal of Recent Research and Review , 2023, ISSN number- 2277-8322
  4. Mr. Rakesh Mahawar, Mr. Onkar Mal Bumker “A Comprehensive Review of Solar Thermal Energy Storage Systems Using Phase Change Materials” in International Journal of Recent Research and Review, 2023, ISSN number- 2277
  5. Dr. Sagar Kumar, "Analysis of dimensional accuracy of RP pattern and RTV mold inserts using DOE technique" IJDE-342378 https://dx.doi.org/10.1504/IJDE.2023.131956 International Journal of Design Engineering, 2023 Vol.12 No.1, pp.1 - 10 (UGC Care).
  5. Ganesh Dubey “Study of Industry 4.0 Pillars and Their Uses in Increasing Productivity and Reducing Logistics Defects”, Materials Today Proceedings. January 2022
  PUBLICATIONS BY STUDENTS
  •  Mr. Pranav Singhal the M. Tech. student (Batch 2019-21) had published his paper titled – “Effect of overhanging of tool, cutting speed and feed rate on surface roughness of SW17 hexagon produced on CNC turning machine with C-axis” International Journal of Advance Research and Innovation, Volume 8 Issue 4 (2020) 292-296, SSN 2347 – 3258
  • Mr. Anirudh Singh Sandu, the M. Tech. student (Batch 2018-20) had published his paper titled - Implementation of DMAIC Methodology of Six Sigma in Vocational Education and Training for Quality Improvement” International Journal of Advance Research and Innovation, Volume 8 Issue 4 (2020) 297-301, SSN 2347 - 3258
• 
  
• Research has been very important aspect for higher education in Dr. K. N. Modi University since beginning.  The research center gives a dynamic and highly perceptible working environment for its students and faculty with a clear objective of developing a leadership quality & expansion of education particularly at higher education level.
• In past years, the research energies have extended to work on different projects by students along with the support of vibrant faculties in different fields like- Engineering & Technology, Agriculture, Health Sciences, Architecture, Education and Management 

THRUST AREA OF RESEARCH:

• Thermal Engineering
• Automobile
• Production
• Industrial Engineering
• Logistics
• Total Quality Management
• Advanced Manufacturing Techniques

• Pradeep Kumar Sharma, “Simulation of forced convection in different honey comb structures” Paper presented in“India Japan Bilateral conference” in Biyaani group of Institutions, Jaipur in Oct. 2014.
• Manvijay Singh, Pradeep kumar Sharma “CFD simulation of forced convection over flat plate with different plate material” Paper presented in Second Rajasthan Science Congress” International conference on Science & Innovation in 21st Century for youth and women development and social transformation” in Dr. KN Modi University, Newai Rajasthan in May 2014.
• Pradeep Kumar Sharma, Dheeraj Mishra, Pawan Kumar “Investigation of spark Ignition engine using ethanol blended as combustion fuel” Paper presented in Second Rajasthan Science Congress” International conference on Science & Innovation in 21st Century for youth and women development and social transformation” in Dr. KN Modi University, Newai Rajasthan in May 2014.
• Pradeep Kumar Sharma, Dheeraj Mishra “Batteries operated electric vehicle Vs hydrogen fuel cell vehicles: A review”. Paper presented in Second Rajasthan Science Congress” International conference on Science & Innovation in 21st Century for youth and women development and social transformation” in Dr. KN Modi University, Newai Rajasthan in May 2014.
• Pradeep Kumar Sharma, Md. Afzal Ali “Study And analysis of compressed air vehicles” Paper presented in “International Conference on technological drift in mechanical & automobile engineering” in Dr. KN Modi University, Newai Rajasthan in Feb 2016.
• Pradeep Kumar Sharma, Harender Singh “Ground water management in urban area A case study on : Alwar Rajasthan” Paper presented in “International Conference on technological drift in mechanical & automobile engineering” in Dr. KN Modi University, Newai Rajasthan in Feb 2016.
• Effective Utilization of Flat Plate Collector in Cooling and Heating, Sayeed Nawaz Vedil, Akhilesh Kumar and Dhaneshwar Mahto, International Journal of Applied Engineering Research. ISSN 0973-4562 Volume 10, Number 4 (2015) pp. 10959-10966.
• Waste Heat Utilization of Vapour Compression Cycle, S.N.Vedil, Akhilesh Kumar and D. Mahato, International Journal of Scientific and Research Publications, ISSN 2250-3153 Volume 4, Issue 11, November 2014.
• Rajesh Kumar Gond “Wind induced action and action effects on cylinder structures with special emphasis on wind climate modelling” ISSN= 2394- 8361 (p), Volume -2, ISSUE-1, JUNE 2015.
• Rajesh Kumar Gond published in ICTDMAE-2016 on “Experimental investigation of sub cooling effect on window air conditioner working on a simple vapour compression cycle using water as a coolant at outlet of condenser & before expansion valve”.
• Onkar Mal Bunkar,Paper entitled “The Performance and Emission Evaluation Of A Compression Ignition Engine Fuelled With Castor Oil- Diesel Fuel Blend By Varying Injection Pressure” published in national Journal Mechanical Engineering & Industry, ISSN 2348-8735, volume 4 issue 6 Jun 2016.
• Onkar Mal Bunkar, Paper titled, “a review of geothermal energy applications” in year 2016 published in the journal of KITE, department of mechanical engineering at Kautilya Institute of Technology & School of Management, sitapura, jaipur (Raj.)

PUBLICATIONS BY STUDENTS

• Mr. Khurshid Alam, the B. Tech. student (Batch 2015-18) had published his paper titled - Improvised Cooling Device in Indian J. of Scientific Research (Indian Citation Indexed), Vol. 18, No. 2, pp. 381-384, 2019.
• Mr. Bhaskar Paul, the B. Tech. student (Batch 2015-18) had published his paper titled - Gasoline Engines Inoculation in Indian J. of Scientific Research (Indian Citation Indexed) , Vol. 18, No. 2, pp. 377-380, 2019.
• Mr. Bhaskar Paul, the B. Tech. student  (Batch 2015-18) had presented the paper in International Conference at KITE, Jaipur on Feb. 21, 2018.
• Mr. Khurshid Alam, the B. Tech. student (Batch 2015-18) had presented the paper in International Conference at KITE, Jaipur on Feb. 21, 2018.

Co-Curricular and Extra-curricular activities

An awareness Program on  “BAT CLUB TRAFFIC RULE”

An awareness program “BAT CLUB TRAFFIC RULE” was organized by Department Of Mechanical & Automobile Engineering on 10/08/2022 at conference hall, DKNMU Newai. More than 50 students of B.Tech, Diploma, schools and faculties from various department participated in this activity. This event was started with a welcome note delivered by Dr. Pradeep Sharma. Mr Rakesh Mahawar (Assistant Professor, Mechanical) delivered about the traffic rules and its advantages. Mr. Onkar mal bunker (HOD Mechanical) coordinator of this event.  In this activity students was benefitted about the traffic rules.

• Tech Wizard Club

PURPOSE

For the overall development of students, co-curricular & extracurricular activities are the way to express the talent and develop their personality. It can be used as a tool to directly or indirectly supplement the classroom teaching learning process.

BENEFITS OF CO - CURRICULAR AND EXTRA CO-CURRICULAR ACTIVITIES

1. The students get a platform to exhibit their hidden talent through participation in various activities like- Games-sports, Yoga, Debate, Art, etc.
2.  These activities not only help in keeping them physically fit but also keep them mentally sound. Winning, losing, getting appreciation, positive criticism all these things when developed in this critical age helps them deal with life challenges all long.
3. It also inculcates innovative thinking and team spirit to make them understand the importance of open discussion and valuing other’s thoughts as well.

Workshop/Guestlectures/Industrial Visit

• 09^th September 2023 An   Expert lecture on “Electric Vehicles- Technology and challenges”
• An expert lecture on “Electric Vehicles- Technology and challenges” organized by Department of Mechanical & Automobile Engineering on 09/09/2023 Internal resource person was Mr. Onkar Mal Bunker (Assistant Prof. & HOD ME). There are more than 20 students of B.Tech & Diploma (ME & EEE) and Applied science department. participated in this talk.

 2. 19th July  2023 An   Expert lecture on Robotics in Education Challenges Developing an Adequate Curriculum

• An expert lecture on “An   Expert lecture on Robotics in Education Challenges Developing an Adequate Curriculum” organized by Department of Mechanical & Automobile Engineering on 19/07/2023 Internal resource person was Mr. Onkar Mal Bunker (Assistant Prof. & HOD ME). There are more than 22 students of B.Tech & Diploma (ME & EEE) and Applied science department. participated in this talk.

3. 7-9th   November 2022 three-day workshop on Recent Trends in Additive Manufacturing & Their Approaches

The department of Mechanical Engineering of Dr. K.N. Modi University organized a 3 days’ “Workshop on Recent trends in additive manufacturing & their approaches”. More than 50 students from various department (mechanical, computer science, pharmacy, electrical, civil) was participated in this workshop. The goal of the workshop to enhance the caliber of students for a recent requirement in the field of Manufacturing Process.

• Industrial visit TATA motors Baroni, RIICO Industrial Area, Phase II Newai (Raj). 304022,   Date: - 08/08/2022.

• 22^nd October 2018to 24^th October 2018 3 day Robotic Workshop

A three day extensive workshop on “Design & Development of Working Robots” was organized by the Robotics Club in association with SakRobotix Labs Bhubaneshwar. Mr. Bibhudutta Sethy from Bhubaneshwar guided the participants to make DIY working robots.

• 28^th  July 2018 One day workshop on Energy Management

Mr. Reetesh Kocheta from Petroleum conservation research association, Jaipur at DKNMU took the students deep into the realm of energy management, Ways and methods to do it and also informed how PCRA is actively contributing towards it.

• 27^th August 2016 Workshop/Seminar on Industries and energies

This seminar was conducted by PCRA. All faculty members invited. This seminar was conducted in the video conference room. Mr. Reetesh Kocheta told about present scenario in industries. He also told how we can save energy in industries and importance of greenery in industries and any institutional area. Certificate of this seminar distributed by PCRA on the occasion of Vishwakarma day on 17/9/2016

• 8 August 2016 Workshop/Seminar on energy conservation

One day seminar conducted by PCRA. All B.Tech and Diploma students of mechanical and automobile engineering (150 students) attended this seminar.  Mr. Reetesh Kocheta told importance of energy and how we can save energy in daily uses

• 16^th August2016 to 4^th October2016AutoCAD software workshop

32 students from B.Tech III sem and Diploma III Sem were registered for this workshop programme. The workshop programme was conducted by CIPET Jaipur. Mr. Arun was faculty appointed from CIPET Jaipur for this training. Students learnt how to use this software, its applications, and importance of this software in industries

• 18^th October 2016 to 19^th October 2016 Two Days National Workshop's Series 2016–17 (NWS-17) 

Our department organized the workshop on IC Engine & Catia software. Forty Five students of diploma and B.Tech participated in this workshop. Workshop completed in following two stages. Two Faculty coordinator nominate for this workshop Mr. Pradeep kumar sharma & Mr. Rajesh gond and two student coordinator nominated shiv prakash Mishra & Aman Mall.

Stage 1: 2 Day Training Program (Workshops)

Stage 2: Mega Competition at College Level.

Following ten students won mega contest:

(i) Shiv prakash Bairwa                        (vi) Sekender Ali

(ii) Shiv Prakash Mishra                       (vii) Rahul kumar Soni

(iii) Tushar sinha                                   (viii) Bhaskar Paul

(iv) Aman Mall                                      (ix) Aman kumar Yadav

(v) Khurshid Alam                                (x) SK Rejjak Ali

• Please Click here for Training course on Repair and maintenance of window and split AC-January 2016.
•  Please click here for Training course on Domestic Electrician- Dec. 2015.
• Please click here for Training course on Domestic Electrician- Sept. 2016.

GUEST LECTURES

• 27^th  March 2019 Expert lecture by Dr. P. N. Rao, University of Iowa, USA 

World Renowned Author of Mechanical Engineering Books, Dr. Rao was there in the campus it was a Fan moment for everyone in the department as he himself delivered expert lecture over various latest manufacturing and production techniques.

• 9^th March 2019 Guest Lecture on Robotics

Mr. Aniket D. Kulkarni from Sakrobotix Lab Bhubaneshwar was there for a session on robotics and the applications in various areas. Later he engaged the participants into practical training and robot assembly.

• 14th September 2018, Expert Lecture on Robotics Technology

Mr. S. K. Mahapatra – Founder of SakRobotix Lab Pvt. Ltd., Bhubaneswar took the important lecture on through Skype on the The Nuances, Manufacturing & Application of Robots in the Daily life as well as in the industries.

• 17th September 2018, Guest Lecture on How to Prepare for Gate Exam

Prof. (Dr.) Harlal Singh Mali from MNIT, Jaipur Lectured on the importance and scope of GATE and also share his expert advice on the correct technique and study pattern to prepare well for GATE.

• 8th Aug 2018, Guest lecture on Future Scope & Challenges

Engineering as profession: Mr. Sanjeev Chaudhary & Mr. Sandeep from CIPET, Jaipur Took an interactive session with the students of Mechanical Engineering Department about the career path, future and the challenges the have to face in their coming years and how to be well prepared for all.

• 4 Aug 2018, Guest Lecture on Career Prospects for Mechanical Engineers

Prof. (Dr.) Ravi Kumar Goyal from BSDU, Jaipur interacted with the students and  provided them with the enlightment about the career scope and prospects for future engineers.

• 23rd March 2018 Guest Lecture on Water harvesting system

Mr. Reetesh kocheta, Petroleum Conservation Research Conservation, Jaipur gave an elaborate lecture on water harvesting system and also emphasized on rain water harvesting, with emphasis on the technical know -how.

• 14th March 2018 Guest Lecture on Green Technology & Energy Management

Mr. Reetesh Kocheta, Petroleum Conservation Research Conservation, Jaipur told the students about green tech. and the government’s efforts through PCRA to make the general public aware about it. He also emphasized on the role of engineers in doing so.

• 23rd January 2018 Guest Lecture on Entrepreneurship Development

Mr. Sumit Shrivastava, Founder, Gensus Edutrainers Jaipur. Had an expert talk session with the students about entrepreneurship development, at length discussion session happened on startups, entrepreneurship, their concepts and how to innovate. He then inaugurated the entrepreneurship cell in the university.

• 11^th October 2016A Programe of Hare Krisna Society

The Hare Krishna Society, Tonk was invited by department of mechanical engineering.  About 150 students, staff and faculties participated in this programme. Firstly our VC Dr. Devendra pathak welcome guests. Then they told us about seva.

Seva is a powerful manifestation of love for one another, this devotional service lives in the homes of everyday people, in our workplaces, in the mindful conduct of our everyday mundane activities. Seva lives in the heart of the mothers & fathers who sacrifice their passions in order to provide for us, in the brothers and sisters who take up the responsibility of raising us. The friends and co-workers that go out of their way to help us all while knowing that we are in no state to return the favour. When we perform these actions with a true & humble heart we begin our path towards living in yoga - in union. Experiencing the oneness within everything through the practice of love & devotion. Programme ended with hare krisna sankritan and question answer session.

Please click here for Guest Lecture on Smart Materials

INDUSTRIAL VISIT

• 18th November 2018 Industrial visit

With the kind guidance of Mr. Mukesh Sharma, M.D. Krsna Urja Newai the students of B.Tech and Diploma Mechanical Engineering visited the industrial facility and got familiar with the system and machinery being used.

• 10^th September 2018 Industrial Visit

The students of B.Tech & Diploma Final year visited the plant of Eicher Engines, Alwar Rajasthan, where they got to know about the various manufacturing machineries and the production facility to manufacture engine parts.

• 28th August 2018 Industrial visit

Mr. M.K. Mohan, CIPET, Jaipur had familiarize the students about production and testing methods of various usage of plastic

• 28th August 2018 Industrial visit

Mr. Dinesh Kumar H.R. Manager Genus Pvt. Ltd. Jaipur helped the students of Mechanical B.Tech & Diploma to understand the system, Production and testing in the production facility.

• Feb. 2016 one day industrial visit

Final year students of Mechanical and Automobile visited the industrial facility of National Bearing Company (NBC) in Jaipur where they got the fundamental details about a bearing   

• April 2016 one day industrial visit

Students from B.Tech and Diploma visited the sprawling fabrication and manufacturing plant KAMAL Coach industries Newai Jaipur and learned about the coach and body manufacturing.

• September 2015 one day industrial visit

The central Institute of Plastic Engineering & Technology demonstrated the students various new techniques in plastic molding and the advanced manufacturing systems.

Results

• BATCH 2018-22
• VISHNU RAJ [2019LBTME010]
• M ROMAN MALLA THAKURI [2017BTME…]
• TAHIR AHMED ANSARI [2019LBTAU001
• BATCH 2017-21
• ANIKET JANGIR [2017BTAU001]
• MD MAHFOOZ ALAM [2017BTME 2018LBTME008]
• TIWARI KAUSHALKUMAR KRISHNA KUMAR [2018LBTME006
• BATCH 2016-20
• Arpit Singh Rajawat [2016BTME015]
• Kunal Koushik [2016BTME 016]
• Bechan Kumar Mandal [2016BTME018]

Please click here to View : Scheme of Mechanical Department 

Please click here for B.Tech Mechanical and Diploma Mechanical Result 2020

RESULTS

Department Toppers Of Mechanical Engineering Are As Follows:

BATCH 2015-19

1^st Pranavendra Singh Rathore [2015BTME012]

2^nd Abhinav Krishna Rahul [2015BTME002]

3^rd Raja Babu [2015BTME014]

BATCH 2014-18

1^st Rahul Soni [2014BTME005]

2^nd Sunil Kumar Mallah [2014BTME007]

3^rd Khurshid Alam [2014BTME002]

BATCH 2013- 17

1^st Shiv Kumar Bairwa [2013BTME009]

2^nd Himanshu Khandelwal [2013BTME004]

3^rd Shubham Kumar [2013BTME010]

BATCH 2012-2016

1^st Navin Nayak [2012BTME015]

2^nd Rinki Gupta [2012BTME049]

3^rd Mithlesh Kumar Mandal [2012BTME014]

BATCH 2011-2015

1^st Saddam Hussain [2011BTME034]

2^nd Dinesh Kumar [2011BTME011]

3^rd Ajoy Doley [2011BTME047]

BATCH 2010-2014

1^st Sajan Kumar Mandal [2010BTME013]

2^nd Amit Jain [2010BTME005]

3^rd Ashish Kumar Sougani [2010BTME001]

Department Toppers Of Automobile Engineering Are As Follows:

2015-2019

1^st Yash Arya [2015BTAU002]

2014-2018

1^st Vertika Singh [2014BTAU002]

2^nd K. Richard Robin [2014BTAU001]

2013-2017

1^st Aman Mall [2013BTAU001]

2^nd Tushar Sinha [2013BTAU002]

3^rd Aman Prakash Bana [2013BTAU003]

2012-2016

1^st K. Sai Ram [2012BTAU005]

2^nd Gautam Kumar [2012BTAU015]

2011-2015

1^st S. Tribhuwan Teja [2012BTAUTO013]

2^nd Saurabh [2012BTAUTO011]

3^rd Sandeep Yadav [2012BTAUTO009]

Institute Industry Interaction

Our department has academic collaborations with departments of many other prestigious institutions and universities in India and abroad such as, University of Surrey Guildford UK, Sheffield Hallam University, IIT Bhubaneswar, IIT BHU, MNIT Jaipur, TTTR Bhopal, DEI Dayalbagh Agra, Govt. Engineering College Raipur, NSIT New Delhi.Apart from these academic collaborations, our department has industrial collaborations as well with Petroleum Conservation and Regulatory Authority (PCRA), Central Institute of Plastic Engineering and Technology (CIPET), Integrated Association of Micro, Small & Medium Enterprises of India (IamSME of India), Kamal Cogent limited, Krsna Urja limited These collaborations help us in keeping our curriculum and teaching methodology updated, research based, industry oriented and at par with the top standards. The Institute encourages its faculty, scientists, technicians and students to interact with industry in every possible ways with the spirit of growing mutual advantage. The major modes of institute interaction are listed below:

1. Eminent Visiting faculty/professors from industries.
2. Visits of faculty to industry for study and discussions or delivering lectures on subjects of mutual interest.
3. Visits of executives and eminent  personalities from industries for mentoring and delivering lectures on recent trends
4. Memoranda of Understanding between the Universities and industries experts to have the two-way emotionally and strategically closer.
5. Provision for Workshops, conferences , guest lectures from industries
6. Collaborative degree programs.
7. Guidance from experts from industries for dissertation in different fields.
8. Short term courses for faculties in different government educational bodies.
9. Various Practical training programs for the students and faculties students in industries.
10. Entrepreneurship opportunities.

Placement

Alumni

Photos (Events)

All Images